APC RAID Subsystem SCSI-SATA II User Manual download pdf (Page 150)

SAS / SATA II NAS System

150

User’s Manual

Windows options:

 Automatic detect Domain IP – This is enabled by default. When enabled,

proNAS will try to automatically detect the domain server’s IP address.

 Hostname - Indicates the NetBIOS name of proNAS; must be set in Network

Manager.

 Domain/Workgroup - Windows Domain name; must be specified in Network

Manager.

 DNS Suffix - The DNS suffix used; must be set in Network Manager.

 Domain Server IP - The IP address of the domain server. proNAS will

automatically acquire the domain server's IP address after setting the Domain

name in Network Manager if “Automatic detect Domain IP” option is enabled.

When “Automatic detect Domain IP” option is disabled, you need to manually

enter the domain server’s IP address.

 Logon account (Administrator) – the administrator’s logon name in the

Domain Controller

 Password - the administrator's password in the Domain Controller.

 PDC/ADS Mode – The type of Domain Controller. Choose PDC for Windows NT

Server or ADS for Windows 2000/2003/2008 Server.

 Auto Detect Enctypes

– This option automatically detects the encryption type

used in Windows authentication. To manually select the encryption type, disable

this option and select the preferred encryption type from the EncType drop-down

list.

 Enable NTLMv2 authentication - This parameter determines whether or not

smbclient will attempt to authenticate itself using the NTLMv2 encrypted

password. If enable, proNAS will only sent NTLMv2 and LMv2 responses. NTLMv2

authentication protocol is available only on WindowsNT4 with SP4 and Windows

2000 or later. Default is disabled.

 Enable client schannel - This controls whether the client offers or even

demands the use of the netlogon schannel. Default is auto, means it offers the

schannel but does not enforce it.

8.3.1.2 Sample Steps to Join the NAS to Windows AD Domain:

1. Select Network Manager. In Network Manager –> Network tab, click “Edit” to

configure network settings.

2. Change the default proNAS Host Name if there are other proNAS systems in the

network. Enter the Windows Domain name in “Domain/Workgroup”. For example:

MYDOMAIN

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 258 259

No comments

APC RAID Subsystem SCSI-SATA II User Manual Page 150