APC RAID Subsystem SCSI-SATA II User Manual download pdf (Page 25)

SAS / SATA II NAS System

User’s Manual

5. Smart Function Front Panel

The smart LCD panel is an option to configure the RAID subsystem. If you are

configuring the subsystem using the LCD panel, press the Select button to login and

configure the RAID subsystem.

Parts Function

Up and Down

Arrow buttons

Use the Up or Down arrow keys to go through

the information on the LCD screen. This is also

used to move between each menu when you

configure the subsystem.

Select button

This is used to enter the option you have

selected.

Exit button EXIT

Press this button to return to the previous

menu.

NOTE: This button can also be used to reset the

alarm beeper. For example, if one power

supply fails, pressing this button will mute the

beeper.

6. Environment Status LEDs

7. Disk Tray

Parts Function

Power LED Green LED indicates power is ON.

Power Fail LED

If a redundant power supply unit fails, this

LED will turn to RED and alarm will sound.

Fan Fail LED

When a fan fails or the fan’s rotational speed

is below 1500RPM, this LED will turn red and

an alarm will sound.

Over Temperature LED

If temperature irregularities in the system

occurs (HDD slot temperature over 65°C),

this LED will turn RED and alarm will sound.

Voltage Warning LED

An alarm will sound warning of a voltage

abnormality and this LED will turn red.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 258 259

No comments

APC RAID Subsystem SCSI-SATA II User Manual Page 25