APC Switched Rack Power Distribution Unit (PDU) User's Guide download pdf (Page 86)

77Metered-by-Outlet With Switching Rack PDU User Guide

Use FTP or SCP to retrieve log files

An Administrator or Device User can use FTP or SCP to retrieve a tab-delineated event log file

(event.txt) or data log file (data.txt) and import it into a spreadsheet.

• The file reports all events or data recorded since the log was last deleted or (for the data log)

truncated because it reached maximum size.

• The file includes information that the event log or data log does not display.

– The version of the file format (first field)

– The date and time the file was retrieved

– The Name, Contact, and Location values and IP address of the Rack PDU

– The unique Event Code for each recorded event (event.txt file only)

Note: The Rack PDU uses a four-digit year for log entries. You may need to select a four-digit

date format in your spreadsheet application to display all four digits.

If you are using the encryption-based security protocols for your system, use SCP to retrieve the log file.

If you are using unencrypted authentication methods for the security of your system, use FTP to retrieve

the log file.

See the Security Handbook, available at www.apc.com, for information on available protocols and

methods for setting up the type of security you need.

To use SCP to retrieve the files. To use SCP to retrieve the event.txt file, use the following

command:

scp username@hostname_or_ip_address:event.txt ./event.txt

To use SCP to retrieve the data.txt file, use the following command:

scp username@hostname_or_ip_address:data.txt ./data.txt

To use FTP to retrieve the files. To use FTP to retrieve the event.txt or data.txt file:

1. At a command prompt, type

ftp and the IP address of the Rack PDU, and press ENTER.

If the Port setting for the FTP Server option (set through the Network menu of the

Administration tab) has been changed from its default (

21), you must use the non-default

value in the FTP command. For Windows FTP clients, use the following command, including

spaces. (For some FTP clients, you must use a colon instead of a space between the IP address

and the port number.)

ftp>open ip_address port_number

To set a non-default port value to enhance security for the FTP Server, see “FTP Server” on

page 91. You can specify any port from 5001 to 32768.

2. Use the case-sensitive User Name and Password for Administrator or Device User to log on. For

Administrator, apc is the default for User Name and Password. For the Device User, the defaults

are device for User Name and apc for Password.

3. Use the get command to transmit the text of a log to your local drive.

ftp>get event.txt

ftp>get data.txt

4. Type quit at the ftp> prompt to exit from FTP.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 129 130

No comments

APC Switched Rack Power Distribution Unit (PDU) User's Guide Page 86