®
®®
®
USER’S GUIDE
masterswitch vm
Control Console interface
You can manage MasterSwitch VM through the Control Console remotely
by using Telnet or locally through a serial connection.
Telnet. To access the MasterSwitch VM unit’s Control Console using
Telnet, at the Windows command prompt (MS-DOS prompt), enter telnet
and the IP address of the unit. For example:
telnet 159.215.12.144
Serial connection. To access the Control Console using a serial
connection:
1. Use the supplied configuration cable (940-0144) to connect your serial
port to the configuration port on the MasterSwitch VM controller.
2. Set the terminal port for the following communication settings:
Logging on. Use the default values for Administrator name and password:
both apc, all lowercase.
Baud Rate 2400
Data Bits 8
Stop Bits 1
Parity None
Handshaking None
Local Echo Off
Terminal Type ANSI (VT100)
To change the username, password and time-out values
through the System menu, see User Manager.
Comments to this Manuals