APC Galaxy 3000 User Manual download pdf (Page 20)

www.mgeups.com

Network

Management Cards

User Manual

THE UNINTERRUPTIBLE POWER PROVIDER

Network Management Card

– User Manual 34003676EN/BB Page 20/76

“Immediate off”: a sequence to switch off output power is launched immediately. The symbol representing the

output flashes, indicating that the sequence is in progress. The systems supplied are shut down correctly while

the shutdown sequence is running, then the output is cut.

“Immediate Toggle”: A sequence to switch off then restore output power is launched immediately. The symbol

representing the output flashes, indicating that the shutdown sequence is in progress. The powered systems

are shut down correctly during the shutdown sequence, then the output is switched off.

Finally, the restart sequence is launched at the end of the time delay specified in the “Toggle duration”

parameter. The output status is updated.

Immediate On: a sequence to switch on output power is launched immediately. The output is re-powered and

the systems supplied start up again correctly.

Delayed Off: this is the same switch off sequence as for the “ Immediate off ” command, but postponed by the

number of seconds programmed in the “Off Delay” parameter.

Delayed Toggle: this is the same switch off then on sequence as for the “ Immediate Toggle ” command, but

postponed by the number of seconds programmed in the “ Off Delay ” parameter.

Delayed Off: this is the same switch on sequence as for the “ Immediate On ” command, but postponed by the

number of seconds programmed in the “ On Delay ” parameter.

The Save button saves the Off Delay, Toggle duration and On Delay parameters on the card .

Security: The administrator must click on Save and enter his login / password to save modifications or run

commands. The login and password by default are: MGEUPS.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

No comments

APC Galaxy 3000 User Manual Page 20