APC Galaxy 3000 User Manual download pdf (Page 41)

www.mgeups.com

Network

Management Cards

User Manual

THE UNINTERRUPTIBLE POWER PROVIDER

Network Management Card

– User Manual 34003676EN/BB Page 41/76

◗ Shutdown After (time before shutdown) This is the time in seconds that the system waits following

failure of AC power before initiating the system-shutdown procedure. This value must be selected to

provide users with enough time to close their applications and disconnect, but within the battery backup

time provided by the UPS.

If another criterion occurs before the end of the shutdown timer, the shutdown procedure is immediately

run.

This parameter is optional, uncheck it to invalidate

◗ Shutdown Duration : This is the time in seconds required by the system to go through its shutdown

procedure.

◗ Broadcast : Send network notifications to the Administrators and Users groups on events

If you wish to set up a new configuration for the Network Shutdown Modules already set to centralized-

configuration mode, proceed as indicated below.

◗ Change the Network Shutdown Module parameters in the page “Central Shutdown Configuration”.

◗ Click the Save button. Open the List of notified applications.

Select the Network Shutdown Modules to receive the new configuration.

Press the button “Remove” They reconnect and use the new configuration

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 75 76

No comments

APC Galaxy 3000 User Manual Page 41