APC Galaxy 3000 User Manual download pdf (Page 66)

www.mgeups.com

Network

Management Cards

User Manual

THE UNINTERRUPTIBLE POWER PROVIDER

Network Management Card

– User Manual 34003676EN/BB Page 66/76

COMMANDS -

1. Modify - Modify an entry of table

2. Reset - Reset an entry to default from table

0. Return to previous menu

Please Enter Your Choice =>

This menu enables configuration of access to the four supervision stations (identified by the IP address) with

read/write community names different to those already defined in the card “1” menu.

First enter the figure corresponding to the command to be carried out, then the number of the target input.

The example below shows how to configure the read/write rights for a station (172.17.1.1) with a community

name MyCom:

Please Enter Your Choice => 1

Entry Number : 1

Enter IP address : [0.0.0.0] 172.172.1.1

Enter Community String : [public] MyCom

Select Access Type -

[NotAccess]

1. Read

2. Read/Write

3. NotAccess

Please Enter Your Choice => 2

+============================================================================+

| IP Address Community String Access |

+============================================================================+

[1] 172.172.1.1 MyCom Read/Write

5.1.4 Choice 4: Restore default configuration

Use this function to restore the card’s factory configuration. Reboot the card so that the network parameter

changes are taken into account.

5.1.5 Choice 5: Reset the card

Use this function to reboot the card

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 75 76

No comments

APC Galaxy 3000 User Manual Page 66