APC MGE Galaxy 7000 User Manual download pdf (Page 51)

Network Management Card & Modbus/Jbus 34022321XT indice :AD Page 51/91

Network Management Teleservice Card

APC by Schneider Electric

www.apc.com

6.5 Environment Sensor (option)

The environment sensor (66846) is an option that enables temperature and humidity to be measured, and indication of the position of two

external contacts. It is connected with a standard network cable to the Card Settings port of the Network Management Card.

The card automatically detects sensor presence. The main menu then displays an additional section "Environment" with the following

elements:

Status

Configuration

Log

Important note: To switch the serial port to the configuration mode, just disconnect the cable and reset the card.

6.5.1 Characteristics

Temperature measurement from 0 to 70 °C with +/- 1°C accuracy

Measurement of humidity from 0 to 100% with +/- 6% accuracy

Min / max time-stamped function for temperature and humidity

Choice of temperature readings in Celsius or Fahrenheit

High and low thresholds, hysteresis and offset adjustable via Web interface

Possibility of notification of status changes by e-mail, SMS or SNMP trap

Position detection of 2 dry contacts (maximum sensor/contact distance: 20 m)

Name and status of each configurable contact

Recording of events and measurements in the card log

Possibility of shutting down the installation safely if one of the thresholds is exceeded or dry contact status change

Connection to the Network Management Card by CAT5 straight RJ45 network cables (maximum card/sensor distance: 20 m)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 90 91

No comments

APC MGE Galaxy 7000 User Manual Page 51