16 NetworkAIR
®
ACPA4000 User Manual
How to Use the Interface
All of the Portable Air Conditioning Unit system settings are controlled through the display interface
located on the front of the unit.
Turn on the unit
After you plug in the power cord, the unit immediately begins operation based on its last programmed
settings.
Scrolling status screens
After system start-up, the interface displays a screen that shows the firmware revision number. The
display interface then scrolls automatically and continuously through five screens of status
information as shown.
.
Press the up or down arrow key to interrupt the automatic scrolling and view a specific status screen.
Note
The unit will wait three minutes before engaging the compressor if the unit has been
unplugged or has been off for less than three minutes.
Comments to this Manuals