APC NETWORKAIR ACPA4000 User Manual download pdf (Page 32)

26 NetworkAIR

ACPA4000 User Manual

Checking Status Readings

The Portable Air Conditioning Unit has several options for viewing the status of the unit and the

environment being cooled. Temperature and humidity readings and the detailed status of the unit are

available through the display interface.

Scrolling status screens

The display interface will automatically scroll through five screens of unit information:

• Active cooling schedule

• Current mode and set point of the unit

• Active alarms

• Current temperature and humidity reading for the supply, return, and remote sensors

• Blower status

Default schedule status

Path: Main Menu > Control Environment.

Displays the settings for the default schedule. These settings do not apply if a programmed schedule

is active. Check the scrolling status screen for the current mode and set point information.

System and environmental status screens

Path: Main Menu > Status.

Detailed Status.

The detailed status screen shows information about various components and their

current state, and the airflow status and pressure in the refrigeration system.

Measurements. The measurements screen displays temperature and humidity readings at the

supply, return, and remote sensors.

Run hours. The unit displays the number of hours each of the three major components has been

running. Move the selector arrow to the component name and press the

ENTER key to enable scrolling

through the list of components: the compressor, condenser fan, and blower. The screen automatically

refreshes with each change to show the total hours. Clear total resets the hours to zero for the

displayed component.

See “Scrolling status screens” on page 16 for navigation instructions.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

No comments

APC NETWORKAIR ACPA4000 User Manual Page 32