APC AP9630 User's Guide Page 4
- Page / 85
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
2UPS Network Management Card 2 User’s Guide
Devices in which you can install the Network Management Card 2. The NMC can be installed in:
• Any Smart-UPS
®
device that has an internal expansion slot, or any Symmetra
®
UPS except the
Symmetra PX 250 or Symmetra PX 500 UPS
• MGE
®
Galaxy
®
300, 3500, or 7000
• Expansion Chassis (AP9600)
• Triple Expansion Chassis (AP9604)
IPv4 initial setup
You must define two TCP/IP settings for the NMC before it can operate on the network:
• the IP address of the NMC
• the IP address of the default gateway (only needed if you are going off segment)
Caution: Do not use the loopback address (127.0.0.1) as the default gateway. Doing so disables the
card. You must then log on using a serial connection and reset the TCP/IP settings to their defaults.
To configure the TCP/IP settings, see the Network Management Card Installation Manual,
available on the Network Management Card Utility CD, on the APC website and in printed form.
For detailed information on how to use a DHCP server to configure the TCP/IP settings at an NMC,
see “DHCP response options”.
IPv6 initial setup
IPv6 network configuration provides flexibility to accommodate your requirements. IPv6 can be used
anywhere an IP address is entered on this interface. You can configure manually, automatically, or using
DHCP, see the “TCP/IP settings for IPv6 screen”.
Network management with Other Applications
These applications and utilities work with a UPS that connects to the network through an NMC.
• PowerChute Network Shutdown — Provide unattended remote graceful shutdown of computers that
are connected to UPS devices
• PowerNet
®
Management Information Base (MIB) with a standard MIB browser — Perform SNMP
SETs and GETs and use SNMP traps
• StruxureWare Central — Provide enterprise-level power management and management of agents, UPS
devices, and environmental monitors.
• Device IP Configuration Utility — Configure the basic settings of one or more NMCs over the
network, see “Device IP Configuration Utility”
• Security Wizard — Create components needed to help with security for the NMC when you are using
Secure Sockets Layer (SSL) and related protocols and encryption routines
- User’s Guide 1
- ロードできます。 2
- 동봉된 CD 안에 한국어 매뉴얼이 있습니다 2
- Introduction 3
- IPv4 initial setup 4
- IPv6 initial setup 4
- Internal Management Features 5
- Front Panel (AP9630) 7
- Front Panel (AP9631) 7
- LED Descriptions 8
- Watchdog Features 9
- Web User Interface 10
- URL format examples 11
- Home Screen 12
- UPS on Status menu 13
- Field Description 14
- Outlet Groups on Status menu 15
- Universal I/O on Status menu 15
- Network on Status menu 15
- Controlling UPS and Security 16
- Action Description 17
- Outlet Groups on Control menu 19
- Security on Control menu 20
- Network on Control menu 21
- Configuring your Settings: 1 22
- Field Description 25
- UPS General screen 27
- Self-Test Schedule screen 28
- Shutdown Scheduling 28
- Firmware Update screen 29
- ftp> quit 30
- 221 Goodbye 30
- Third Party Support screen 32
- Universal I/O screens 33
- Input Contacts screen 34
- Output Relay screen 34
- Security menu 36
- Remote Users authentication 37
- RADIUS screen 38
- Configuring the RADIUS Server 38
- Firewall screen 39
- Configuring your Settings: 2 40
- Option Description 41
- DHCP response options 42
- address of the primary DNS 43
- Testing DNS screen 44
- Web access screen 44
- Web SSL Certificate screen 45
- Console screen 45
- SNMP screens 46
- SNMPv3 47
- FTP Server screen 48
- Notification menu 49
- E-mail notification screens 51
- SNMP Trap Receivers screen 53
- SNMP Traps test screen 54
- Remote Monitoring Service 54
- General menu 55
- Configure Links screen 56
- Logs on Configuration menu 57
- Tests menu 59
- Logs and About menus 60
- Data log 61
- Path: Logs > UPS 63
- Energy Usage 64
- Firewall Log 64
- About the UPS device 65
- Support screen 66
- System requirements 67
- Installation 67
- Summary of the procedure 68
- Contents of the .ini file 68
- Detailed procedures 68
- Messages in config.ini 70
- Related Topics 71
- File Transfers 72
- NMC over the network: 73
- NMC, see “FTP Server” 73
- C:\>cd apc 73
- C:\apc>dir 73
- Use XMODEM to upgrade one NMC 74
- NMC firmware: 75
- iplist.txt file 76
- Verifying Upgrades 77
- Troubleshooting 79
- SNMP Issues 80
- Synchronization Problems 80
- Two-Year Factory Warranty 81
- Warranty claims 82
- Radio Frequency Interference 83
- Australia and New Zealand 84
- European Union 84
- Korean 한국 84
- 990-3402E-001 85
Related products and manuals for Networking APC AP9630
Networking APC IP DSLAM User's Guide
(67 pages)
(67 pages)
Networking APC AP9630 User Manual
(117 pages)
(117 pages)
Networking APC AP9630 User Manual
(32 pages)
(32 pages)
Networking APC AP9224110 Specifications
(16 pages)
(16 pages)
Networking APC AP9608 Specifications
(9 pages)
(9 pages)
Networking APC AP9608 User Manual
(4 pages)
(4 pages)
Networking APC ADSL 4-Port User Manual
(13 pages)
(13 pages)
Networking APC 2200VA User Manual
(6 pages)
(6 pages)
Networking APC AP9622 User Manual
(4 pages)
(4 pages)
Networking APC AP9630 User's Guide
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 1.909 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals