APC MGETM GALAXYTM 6000 User Manual download pdf (Page 10)

Page 10 - 6739381EN/JD

Installation

(to be carried out by qualified personnel only)

Handling

Positioning the cubicles

Side clearances provided by the spacing uprights

Fig. 4

50

50

spacing uprights

of cubicle 2

cubicle 1

cubicle 2

spacing uprights

of cubicle 1

front

rear

Unpacked cubicles may be moved

using a forklift from the front or from the

back. Distances must not exceed a few

meters.

(for 600 kVA UPSs, see the appendix

as well)

◗ prior to moving the cubicles to their

final position, remove the packing

material and withdraw the base panels

from the space on the side created by

the spacing uprights. The panels will be

installed at the end of the installation

procedure;

◗ spacing uprights on the sides of the

cubicles create a 50 mm clearance

when cubicles are positioned next to

each other, enabling users to open the

doors (see figure 4). If a cubicle is

installed next to a wall, leave additional

space so that the cubicle is 50 mm from

the wall;

◗ when the spacing uprights are not

required (cubicles are not positioned

next to a wall or another cubicle), they

may be removed:

◗◗ loosen the four screws securing the

upright,

◗◗ lift the upright and pull it free,

◗◗ replace the long gold-coloured

screws with the black screws supplied

in a bag attached to the cable terminals

in the cubicle;

◗ adjust the height of the feet until the

first cubicle is perfectly vertical; adjust

the feet of the subsequent cubicles so

that the all the doors are perfectly

aligned.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Comments to this Manuals

No comments