APC MGETM GALAXYTM 6000 User Manual download pdf (Page 5)

6739381EN/

Rectifier-inverter cubicles

Characteristics of rectifier-inverter cubicles

rated cubicle cubicle cubicle maximum

inverter width W height H depth D weight

output in mm (1) in mm in mm in kg

in kVA

250 1600 1900 ± 10 840 1650

300 1600 1900 ± 10 840 1650

400 1600 1900 ± 10 840 2030

450 1600 2000 ± 10 840 2070

500 1600 2000 ± 10 840 2205

600 3600 1900 ± 10 840 3500

Characteristics of Static Switch Cubicles

rated cubicle cubicle cubicle maximum heat

SSC width W height H depth D weight losses (2)

output in mm (1) in mm in mm in kg

in kVA in kW in cal./s

500 1000 1900 ± 10 840 350 2.9 696

800 1000 1900 ± 10 840 500 3.7 888

1200 1600 1900 ± 10 840 1000 < 0.5 < 120

2000 2450 1900 ± 10 840 1710 < 0.5 < 120

Static Switch cubicles

The parameters given in the table

opposite can be used to determine the

required rating of a single-unit or

modular UPS, a frequency converter, or

a parallel UPS with SSC.

Characteristics of external maintenance bypass cubicles

(Modular UPS with external maintenance bypass)

rated cubicle cubicle cubicle maximum

bypass width W height H depth D weight

in kVA in mm (1) in mm in mm in kg

1200 1200 1900 ± 10 840 450

External maintenance bypass cubicles

Characteristics (cont.)

When installing several cubicles, allow for a tolerance of 0/+3mm per metre.

(1) 25 mm must be added on each side to the indicated cubicle width, i.e. 50 mm in all per cubicle. This

applies to all cubicle installation cases.

(1) 25 mm must be added on each side to the indicated cubicle width, i.e. 50 mm in all per cubicle. This

applies to all cubicle installation cases.

When installing several cubicles, allow for a tolerance of 0/+3mm per metre.

(1) 25 mm must be added on each side to the indicated cubicle width, i.e. 50 mm in all per cubicle. This

applies to all cubicle installation cases.

When installing several cubicles, allow for a tolerance of 0/+3mm per metre.

"Pack Advance" cubicles

Characteristics of "Pack Advance"Cubicles

rated cubicle cubicle cubicle maximum heat

SSC width W height H depth D weight losses (2)

output in mm (1) in mm in mm in kg

in kVA in kW in cal./s

300 400 1900 ± 10 840 335 2.9 696

400 400 1900 ± 10 840 440 3.7 888

450 400 1900 ± 10 840 440 < 0.5 < 120

(1) 25 mm must be added on each side to the indicated cubicle width, i.e. 50 mm in all per cubicle. This

applies to all cubicle installation cases.

When installing several cubicles, allow for a tolerance of 0/+3mm per metre.

1 2 3 4 5 6 7 8 9 10 ... 45 46

Comments to this Manuals

No comments

APC MGETM GALAXYTM 6000 User Manual Page 5

Comments to this Manuals

Related products and manuals for UPS batteries APC MGETM GALAXYTM 6000