APC KVM1116P User Manual download pdf (Page 14)

KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 2

KVM2132P / KVM2116P KVM Switches only

• Dual power is available on KVM2132P and KVM2116P. Power cords plugged into separate

power sources ensure power to the switch if one power sources fails.

• Variable fan speed: changes according to the switches temperature.

• PDU connection port allows administrators to boot or reboot servers.

• Two 10/100/1000 Mbps NICs for redundant LAN or two IP operations.

Safety

Read all of these instructions. Save them for future reference. Follow all warnings and instructions

marked on the device.

DANGER

HAZARD OF ELECTRIC SHOCK

• Do not use the device near water, Never spill liquid of any kind on the device.

• Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning.

• The device should be operated from the type of power source indicated on the

marking label. If you are not sure of the type of power available, consult your

dealer or local power company.

• To prevent damage to your installation it is important that all devices are properly

grounded. The device is equipped with a 3-wire grounding type plug. This is a

safety feature. If you are unable to insert the plug into the outlet, contact your

electrician to replace the outlet. Do not attempt to defeat the purpose of the

grounding-type plug. Always follow local/national wiring codes.

• If an extension cord is used with this device make sure that the total of the ampere

ratings of all products used on this cord does not exceed the extension cord

ampere rating. Make sure that the total of all products plugged into the wall outlet

does not exceed 15 amperes.

• To help protect your system from sudden, transient increases and decreases in

electrical power, use a surge suppressor, line conditioner, or uninterruptible power

supply (UPS).

• Position system cables and power cables carefully; Be sure that nothing rests on

any cables.

• Never push objects of any kind into or through cabinet slots. They may touch

dangerous voltage points or short out parts resulting in a risk of fire or electrical

shock.

• There is a risk of explosion if the battery is replaced by an incorrect type. Dispose

of used batteries according to the instructions.

• Use the power cords supplied with this package. If it becomes necessary to replace

the cords supplied with this package, be sure to use cords of at least the same

standard as the ones provided. Contact your dealer for information about power

cords.

• Do not attempt to service the device yourself. Refer all servicing to qualified service

personnel.

Failure to follow these instructions can result in death or serious injury.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 133 134

Comments to this Manuals

No comments

APC KVM1116P User Manual Page 14

Comments to this Manuals

Related products and manuals for KVM switches APC KVM1116P