APC InfraStruXure PDU Specifications download pdf (Page 24)

16 40kW InfraStruXure PDU—Operation and Configuration

Contacts Screen

Overview

The PDU can monitor external contact closure events. Possible applications include the following:

• Magnetic contact switches

• Window foil

• Tamper switches

• Heat detectors

• Water sensors

• Pressure sensors

• Building smoke and fire detection systems

You can set input contacts to cause alarm conditions based on their current state and a user-defined

normal state. Relay outputs can map internal alarms and events to outside devices. Use the Contacts

screen to display and configure information about input contacts and relay outputs.

Input Contacts Scroll through the list to display information about each of the

installed contact inputs. For example, 02of04 displays

information about the second of four installed contact inputs.

• Name—The name of this input contact (Maximum: 14

alphanumeric characters.)

• Normal—The normal position of this input contact, either

Open or Closed.

• Status—The position of this input contact. If the position is

not the normal position, an alarm condition occurs.

Relay Outputs Scroll through the list to display information about each of the

installed relay outputs. For example, 04of04 displays

information about the fourth of the four available relay outputs.

• Name—The name of this relay output (Maximum: 14

alphanumeric characters).

• Normal—The normal position of this relay output, either

Open or Closed.

• Status—The position of this relay output.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 87 88

No comments

APC InfraStruXure PDU Specifications Page 24