APC InfraStruXure PDU Specifications Page 30
- Page / 88
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
PDU Display Interface
22 40kW InfraStruXure PDU—Operation and Configuration
PDU Alarms
This table lists all alarms that can be generated by the InfraStruXure PDU, as displayed by the All Possible
Alarms option, with numeric variables between the < > characters. Logged alarms will display specific
numbers instead.
Alarm Condition Explanation
Input V <Ln-N> =<Value>
Voltage Under Limit
Input voltage of the phase indicated has dropped below the
configured lower limit.
Input V <Ln-N> =<Value>
Voltage Over Limit
Input voltage of the phase indicated exceeded the configured
upper limit.
Output V <Ln-N> =<Value>
Voltage Under Limit
Phase-to-neutral output voltage for phase <L-N> dropped below
the configured limit.
Output V <Ln-N>=<Value>
Voltage Over Limit
Phase-to-neutral output voltage for phase <L-N> exceeded the
configured limit.
Output I L<n>=<Value>
Current Over Limit
Current of output phase <n> exceeded the configured limit.
Output I L<n>=<Value>
Current Under Limit
Current of output phase <n> dropped below the configured limit.
Output Neut=<Value>
Current Over Limit
Current on the neutral wire for the output phases exceeded the
configured limit.
Output FDev=<Value>
Freq Out of Range
Frequency of the output current is above or below the range that
is configured as acceptable.
Input Transformer Temperature
Too High
The temperature of the PDU transformer exceeded the normal
limit (if applicable).
Main Breaker Open
Alarm Active
The Main Input switch is Off.
<User Contact Name>
Alarm Active
A user-configured contact connected to the PDU monitoring unit
is reporting an alarm condition.
No UPS Input
Breaker Q1 Open
The Q1 circuit breaker is open, and the PDU is not receiving
power from the UPS.
No Panel Feed
Breakers Q2 & Q3 Open
The Q2 & Q3 circuit breakers are open, and the PDU is not
supporting connected equipment.
Atypical Bypass Mode
Alarm Active
The system state as set by the Q1, Q2, & Q3 breakers is in a
bypass mode.
Branch Ckt Pos: <nn>
Current Over Limit
Current on one of the poles of branch circuit breaker <nn>
exceeded the configured limit.
Branch Ckt Pos: <nn>
Current Under Limit
Current on one of the poles of branch circuit breaker <nn>
dropped below the configured limit.
Fan Rotation Failure
Alarm Active
There is a failure in one of the fans. The fan needs to be replaced
(if applicable).
- 40kW InfraStruXure PDU 1
- About This Manual 3
- Contents 5
- Warnings 10
- Electrical 11
- Overview 13
- Front view (interior) 14
- Rear view (interior) 15
- PDU monitoring unit 16
- User connection plate 17
- PDU Display Interface 19
- Top-level status screens 20
- Top-level menu screen 20
- Navigating through screens 20
- Password-protected screens 21
- Load-Meter Screen 22
- Volt-Meter Screen 23
- Contacts Screen 24
- Alarm Map: 01 of 04 25
- [Vo, By, C4] 25
- Map: Input Voltage 25
- Apply Now 25
- Breakers Screen 27
- Alarms Screen 28
- Alarm Setup 29
- Alarm Beeper 29
- PDU Alarms 30
- Panel Screen 31
- Panel Configuration 32
- Global Panel Config 33
- Config Screen 34
- Electrical Config 35
- Manufacturer Data 36
- System ID 36
- Factory Defaults 36
- Firmware Updates 36
- System Operation 37
- UPS has been 38
- UPS load is in Bypass 38
- Press any key 38
- Operation 40
- Top-Level Menu 41
- Control Menu 41
- Confirmation Screen 41
- How to Ensure Total Power Off 43
- Top-Level Status Screen 47
- Communication Configuration 49
- Interface 51
- Configuration Overview 52
- TCP/IP configuration methods 52
- Option 43 = 01 04 31 41 50 43 54
- 01) is the code 54
- 04) is the length 54
- from the Network menu 56
- Interface on a Configured PDU 57
- FTP and SCP 59
- Management Interface Password 60
- Important Safety Instructions 61
- PDU Orderable Part List 62
- Add a power cable to the PDU 63
- Testing the switch 68
- EPO Ready To Test 69
- Active Alarm xxofxx 69
- Safety warnings 70
- From a local computer 71
- Specifications 73
- Product Information 77
- Life-Support Policy 79
- How to Obtain Service 80
- General changes 81
- Changes by page number 81
- *990-1597B-001* 88
Related products and manuals for Network switches APC InfraStruXure PDU
Network switches APC AP7922 User Manual
(27 pages)
(27 pages)
(15 pages)
Network switches APC AP9212 User's Guide
(147 pages)
(147 pages)
Network switches APC AP9217 User Manual
(10 pages)
(10 pages)
Network switches APC AP5202 Specifications
(20 pages)
(20 pages)
Network switches APC EP Zero ARF User Manual
(16 pages)
(16 pages)
Network switches APC AP9225 User's Guide
(67 pages)
(67 pages)
Network switches APC UTS6BI User Manual
(15 pages)
(15 pages)
© 2020, manymanuals.com. All rights reserved. | 0.421 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals