APC RAID Subsystem SCSI-SATA II User Manual Page 55

  • Download
  • Add to my manuals
  • Print
  • Page
    / 259
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 54
SAS / SATA II NAS System
User’s Manual
55
5.2.5 Activate Incomplete RAID Set
When Raid Set State is “Normal”, this means there is no failed disk drive.
When does “Incomplete” Raid Set State Happens?
If the RAID controller (and the NAS system) is powered off and one disk drive is
removed or has failed in power off state, and when the NAS system is powered on,
the Raid Set State will change to “Incomplete”.
The Volume Set will not be visible and the failed or removed disk will be shown as
Missing”. At the same time, the NAS system will not detect the Volume Set,
hence the NAS volumes are not accessible.
Page view 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 258 259

Comments to this Manuals

No comments