APC RAID Subsystem SCSI-SATA II User Manual download pdf (Page 56)

SAS / SATA II NAS System

User’s Manual

When is the “Activate Raid Set” function can be used?

In order to access the Volume Set and corresponding data, use the Activate

Incomplete RAID Set function to active the Raid Set. After selecting this

function, the Raid State will change to “Degraded” state.

To activate the incomplete the Raid Set, click on the Activate Incomplete RAID

Set link. A “Select The Raid Set To Activate” screen is displayed showing all existing Raid

Sets in the subsystem. Select the Raid Set with “Incomplete” state which you want to

activate in the Select column.

Click on the Submit button to activate the Raid Set. The Volume Set(s) associated

with the Raid Set will become accessible in “Degraded” mode.

NOTE: The “Activate Raid Set” function is only used when Raid Set

State is “Incomplete”. It cannot be used when Raid Set

configuration is lost. In case the Raid Set configuration is lost,

contact your vendor for support.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 258 259

No comments

APC RAID Subsystem SCSI-SATA II User Manual Page 56