APC MGE Galaxy 7000 User Manual download pdf (Page 19)

Network Management Card & Modbus/Jbus 34022321XT indice :AD Page 19/91

Network Management Teleservice Card

APC by Schneider Electric

www.apc.com

5.1.1 Your network is equipped with a DHCP server

The card is configured by default with this service activated.

The card automatically collects IP parameters.

To know the IP parameters, type 2, the next menu is displayed:

-----------------------------------------------------------------------------

Network settings

-----------------------------------------------------------------------------

1 : Read Network settings

2 : Modify Network settings

3 : Set Ethernet speed

0 : Exit

-----------------------------------------------------------------------------

Then type 1. The menu is displayed:

Network configuration :

MAC address : 00:06:23:00:1F:8F

Mode : Static IP

IP address : 172.17.21.94

Subnet mask : 255.255.248.0

Gateway : 172.17.17.1

Note the IP address.

To exit, enter 0 then 0. The card is operational.

Note: As long as the card is not connected to the network, it continuously attempts to make connection. Once the connection has been

established, the operational mode presented in the table above becomes effective.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 90 91

No comments

APC MGE Galaxy 7000 User Manual Page 19