APC P D U User's Guide download pdf (Page 42)

USER’S GUIDE

Switched Rack PDU

Setting outlet group port.

Create a local outlet group (Web interface)

1. From the Device Manager tab, select Information from the Outlet Groups left

navigation menu.

2. Make sure outlet groups are enabled.

3. Click Create Local Outlet Group.

4. Under Configure Local Outlet Group, select each outlet that will be in the group

and assign the group a name in the Outlet Group Name field. You must select at

least two outlets.

Create multiple global outlet groups (Web interface)

To set up multiple global outlet groups that link to outlet groups on other Switched Rack

PDUs:

1. From the Device Manager tab, select Information from the Outlet Groups left

navigation menu.

2. Make sure outlet groups are enabled and that the Multicast parameters (name and

Parameter Description

Outlet Group Port The port number on which the device will communicate with other

devices.

Devices wishing to synchronize with Outlet Groups on other

devices must all have the same Authentication Phrase, Encryption

Phrase, and Group Port number. The values are hidden to the

user.

See Enable outlet groups.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 124 125

No comments

APC P D U User's Guide Page 42