APC CM Series User Manual download pdf (Page 34)

APC NetworkAIR CM Series: Guide Specifications 29

Guide Specifications

General Summary. These specifications described herein are for an environmental

control system. The system shall be designed specifically to monitor and

control temperature and relative humidity within a conditioned space. The

manufacturer shall supply all equipment in the quantities and configurations

shown on the project drawings. The system shall be NRTL listed.

Design requirements. The system shall be as described in the following

specification as manufactured by APC.

Model AFX _____________________________________.

Total cooling capacity: ________________ MBH (kW).

Sensible cooling capacity: ________________ MBH (kW).

Return air temperature: ________________ ° F (° C).

Dry bulb: ________________ ° F (° C).

Wet bulb: ________________% RH.

Air quantity: ________________ CFM (L/s) at 0.5" (125 Pa) external static

pressure.

Humidifier capacity: ________________ kW.

Electrical supply: __________ V, ______ ph, 60 Hz.

Submittals. Submittals shall be provided with the proposal and shall

include: Capacity data, electrical data, physical data, electrical connection

drawing, piping connection drawing, and electrical wiring schematic.

Quality assurance. The system shall be completely factory-tested prior to

shipment. Testing shall include, but not be limited to; Completely charging

the system (where applicable) with refrigerant to ensure pressurized integrity,

“Hi-Pot” test, and controls calibration/setting. Each system shall ship with a

completed test report to verify completion of factory-testing procedure.

Product Unit construction. The chassis and access panels shall be constructed of

heavy gauge galvanized. Hanger mounting brackets shall be part of the

chassis and shock-mounts shall be provided for vibration isolation. Access

panels shall be insulated with 1/2" (12mm) thick 1½ lb./ft² (24kg/m²).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 72 73

No comments

APC CM Series User Manual Page 34