APC Smart-UPS Specifications download pdf (Page 7)

3Smart-UPS X-Series Operation

Specifications

Operating Conditions

This unit is intended for indoor use only. Select a location sturdy enough to support the weight of the

UPS and External Battery Packs (XLBP)..

Do not operate the unit where there is excessive dust, or the temperature or humidity are outside the

specified limits.

This unit has front and rear air vents. Allow adequate space for proper ventilation.

Environmental Specifications

Environmental factors impact battery life. High temperatures, poor utility power, and frequent, short

duration discharges will shorten battery life.

For additional specifications, see the APC Web site at www.apc.com.

Installation

UPS

For UPS installation information, see the Smart-UPS X-Series Quick-Start guide that is

included with the UPS. The guide is also available on the enclosed CD and the APC Web site

at www.apc.com.

Network Management Card

For installation information, see the user manual provided with the Network Management

Card (NMC). The user manual is also available on the APC Web site at www.apc.com.

External Battery Pack

For installation information, see the Smart-UPS X-Series External Battery Pack Installation

guide that is included with the external battery pack. The guide is also available on the

enclosed CD and the APC Web site at www.apc.com.

Temperature

Operating 0° to 40° C (32° to 104° F)

Storage -15° to 45° C (5° to 113° F)

charge UPS battery every six months

Maximum

Elevation

Operating 3,000 m (10,000 ft)

Storage 15,000 m (50,000 ft)

Humidity

0% to 95% relative humidity, non-condensing

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

APC Smart-UPS Specifications Page 7