APC ACECFR20200SE4 Installation Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
EcoBreeze System Operation and Maintenance16
Start the System
Path: Main > Operate > On/Off
To start the System from the scrolling status screen, press the RIGHT key, select the Operate
option on the list and press the
ENTER key.
N
OTE: If the Operate Access password is non-zero, the password screen will be presented
after
ENTER is pressed.
The screen changes to show Operate Off. Press
ENTER to select Off. The highlighted box
around the word Off will start to flash. Press the
UP key to change the setting to On. Press
ENTER to confirm the change. The system will run according to the current settings. Press ESC to
return to the previous screen.
Stop the System
Path: Main > Operate > On/Off
To stop the System, press the RIGHT key, select Operate, then press ENTER. The screen
changes to show only Operate On. Press the
DOWN key to change the setting to Off. Press
ENTER to confirm the change. The system will shut down. Press ESC to return to the previous
screen.
Set date and time
Path: Main > Date & Time
Select Date & Time from the main menu. The changes can be made on the sub menu page.
Press the
RIGHT arrow to move the highlight box across each part of the date and time. Press
the
UP or DOWN key to change the increment. AM or PM is also adjusted with the UP or DOWN
key. See the illustration at “Navigating sub menus” on page 15.
See “The Embedded Display Menus” on page 18 for information on setting the
display format of the date and time.
Set display units
Path: Main > Display Units
This information is password protected. Select to display information in US or metric units.
Set identification
Path: Main > Identification > Name
This information is password protected. Add system or emergency information your installation
requires. The display interface can hold up to 21 alphanumeric characters in the selected entry.
Use the
UP and DOWN keys to move through the characters. Press ENTER to select the character.
Use the
RIGHT and LEFT keys to move to the next character space.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments