General cleaning
Inspect and clean the EcoBreeze system on a regular basis. Do not use cleaners, chemicals,
or other materials with strong fumes or odors. Thoroughly remove all cleaning solution residue
from interior surfaces.
• Remove any debris.
• Exterior: Spray wash the exterior with low pressure water and a mild detergent. All
detergent must be removed with clean water.
• Coils (evaporative and condenser): Clean the fins with steam or a non-corrosive solvent
and water hose to remove oil, pollen, dust, and soil. Do not use a direct high-pressure
blast as damage to the coil may occur. Do not spray water into any compartment not
equipped with a floor drain. Excessive accumulations of water could leak or cause
damage.
• Dump and flush the basin. Ensure the fill line drain valve opens when the fill valve closes
and that the basin drain opens.
Comments to this Manuals