APC ACRC301S User's Guide Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
InfraStruXure InRow RC—Operation and Maintenance 15
Set Up the Display
Set display settings including the time and date, temperature units, passwords, and time-out settings.
Password and time-out
Path: Main > Set Password
Change passwords.
Set the passwords necessary to change
group settings.
1. Move the selector arrow next to the Change Passwords
option and press the
ENTER key.
2. If there has not been a keypress and the Password time-out
has elapsed, you will be prompted to enter your current
Admin password. Press the
ENTER key. You will return to the Change Password screen. Press
the
ENTER key.
3. Select the password to change (either Admin or Device).
4. Enter a new password (up to 8 characters).
5. Press the
ENTER key to confirm.
Password time-out. Set the Time-out period during which settings can be changed after the
password is entered. After the period has elapsed without a keypress, password entry will be required
and the display interface will return to the scrolling status screens.
Invalidate Password. Override the password time-out and require password entry again with the
Invalidate NOW option.
Note
The default user password is apc (lower case). See
“Password entry” on page 4 for more information on
how to enter the password.
On/Standby
View Alarms
Clear Alarms
View Event Log
na1642a
Clear Event Log
Configure Modbus
Set Date & Time
Set Password
Set Display Units
Configure Display
Configure Network
About InRow RC
Set Identification
Service Intervals
View Run Hours
Configure Unit
Configure Group
Set Group PID
View Group Status
View Unit Status
Set Group Setpoints
Set Unit Thresholds
Change Passwords
Timeout: 3min
Invalidate NOW
na1657a
Admin Password:
********
Device Password:
********
na1658a
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Comments to this Manuals

No comments