APC ACRC301S User's Guide download pdf (Page 41)

Network Management Card: How to Access a Configured Unit

InfraStruXure InRow RC—Operation and Maintenance 35

SNMP

SNMP is the abbreviation for Simple Network Management Protocol. After you add the PowerNet MIB

to a standard SNMP MIB browser, you can use that browser for SNMP access to the InRow RC. The

default read community name is public; the default read/write community name is private.

FTP/SCP

You can use FTP (enabled by default) or Secure CoPy (SCP) to transfer new firmware to the Network

Management Card, or to access a copy of the InRow RC event logs. SCP provides the higher security of

encrypted data transmission and is enabled automatically when you enable SSH.

To access the Network Management Card through FTP or SCP, the default user name and password are

apc and apc for an Administrator, or device and apc for a Device User. In the command line, use the IP

address of the unit.

Note

If you enable SSL and SSH for their high-security authentication and encryption,

disable SNMP. Allowing SNMP access to the InRow RC compromises the high

security you implemented by choosing SSL and SSH. To disable SNMP, you must be

an Administrator; on the Administration tab, select Network on the top menu bar

and the access option under SNMP on the left navigation menu.

Note

If you enable SSL and SSH for their high-security authentication and encryption,

disable FTP. Allowing file transfer to the InRow RC through FTP compromises the

high security you implement by choosing SSL and SSH. To disable FTP, you must be

an Administrator; on the Administration tab, select Network on the top menu bar

and the FTP Server option on the left navigation menu.

No comments

APC ACRC301S User's Guide Page 41