APC RAID Subsystem SCSI-SATA II User's Guide download pdf (Page 25)

Monitoring Your SS2460

96-00290-001 Rev. A1 DataDirect Networks StorageScaler 2460 User Guide | 19

This chapter describes the status and activity LEDs that help you monitor the DataDirect

Networks StorageScaler 2460 enclosure and its components.

3.1 Monitoring the Enclosure

Figure 25. Four Enclosure LEDs

Not Used

Enclosure Fault

Power

Locate

Table 1. Enclosure LED Indicator Description

Enclosure Fault Amber

Locate Beacon Blue

Power Green

On the right side of the front of the SS2460 enclosure are four LEDs which indicate the status

of the whole enclosure (Figure 25). The LEDs are defined in Table 1.

When a failure occurs on a controller or APC unit, the enclosure LEDs indicate an enclosure

fault. Because the I/O controllers and APC units are on the back of the SS2460 enclosure,

where they may be hard to see, the enclosure LEDs can help you monitor all the components

in the enclosure.

LED Color Description

ON - one or more detectable faults are present

OFF - no detectable faults

lashes - receiving Locate command

OFF - NO

T receiving

Locate command

ON - power is applied to enclosure

OFF - no po

wer is applied to enclosur

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 45 46

No comments

APC RAID Subsystem SCSI-SATA II User's Guide Page 25