®
USER’S GUIDE
Switched Rack PDU
2
• Four levels of user access accounts—Administrator, Device User, Read-Only User,
and Outlet User.
• Event and data logging—the event log is accessible by Telnet, Secure CoPy (SCP),
File Transfer Protocol (FTP), serial connection, or Web browser (using HTTPS
access with SSL, or using HTTP access). The data log is accessible by Web
browser, SCP, and FTP
• E-mail notifications for Rack PDU and system events
• SNMP traps, Syslog messages, and e-mail notifications based on the severity level
or category of Rack PDU and system events
• A selection of security protocols for authentication and encryption
Initial setup
You must define three TCP/IP settings for the Switched Rack PDU before it can
operate on the network.
• IP address of the Rack PDU
• Subnet mask
• IP address of the default gateway
The Rack PDU does not provide power protection. Therefore, APC
does not recommend plugging a unit directly into any unprotected
power source, such as a wall outlet.
Caution
Do not use the loopback address (127.0.0.1) as the default
gateway address. It disables the Switched Rack PDU and
requires you to reset TCP/IP settings to their defaults using a local
serial login.
See also
To configure the TCP/IP settings, see the Installation and Quick Start
manual provided as a PDF file on the Switched Rack PDU Utility CD,
and as a printed manual.
Comments to this Manuals