7Smart-UPS® VT 10-40 kVA 380/400/415 V - 208/220 V - 200/208 V Installation in Parallel
Route the PBus cables to UPS 2 and to the slots on the left side of the enclosure, and up inside thexpanel.
Fish out the PBus cables and leave them unattached to the parallel box.
Route the ABus cable from the Maintenance Bypass Panel to the slots on the left side of the enclosure and
up inside the panel the same way as for the PBus cables.
Reattach the cable-inlet covers.
Fasten the cables with cable ties.
Note: Proceed the routing of cables into UPS 3 and UPS 4, if applicable.
Comments to this Manuals