APC ACFS76080 Installation Manual download pdf (Page 81)

79Uniflair LE Accessories Manual

5. Wait two minutes to allow the system to reboot.

Verifying setup

1. To check that the procedure has been carried out correctly, enter the address “172.16.0.1” in the

Internet Explorer browser. Internet Explorer should not allow entry into the page.

2. Enter the new pCOWeb controller address. The main start screen appears.

Returning to the initial configuration

1. Repeat steps one through seven of “Setting the IP address and subnet mask” on page 75.

2. On the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address automatically.

3. Click OK to apply the changes and close the window.

4. Click OK to close the remaining open windows.

The PC needs to be reset so that the network “proxy” device can be re-used and it can answer to the IP

address that was already set, as well as the second IP address that is compatible for direct communication with

the pCOWeb (example: http://10.0.8.56).

Resetting the system after returning to the initial configuration

1. Repeat steps one through five of “Setting the IP address and subnet mask” on page 75.

2. On the Local Area Network (LAN) Settings window, select “Use a proxy server for your LAN” check

box.

3. Select Advanced. The Proxy Settings window displays.

4. In the “Exceptions” field, enter the address chosen for communication with pCOWeb (for example: http:/

/10.0.8.56).

5. Click OK to apply the changes and close the window.

6. Click OK to close the remaining open windows.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 99 100

No comments

APC ACFS76080 Installation Manual Page 81