APC ACFS76080 Installation Manual download pdf (Page 83)

81Uniflair LE Accessories Manual

1. Disconnect the power.

2. Using a screwdriver, remove the plastic hatch from the electronic controller.

3. Using cutting nippers, remove the precut plastic hatch.

4. Insert the pCOWeb card into the pCO controller and ensure it is fully seated. Ensure that the board is

properly fitted and rests against the two plastic supports on the pCO controller case.

5. N

OTE: The insertion of the card and the fitting of the connectors may be difficult due to the space

available and the location of the two plastic supports. Insert the board obliquely and rotate until the

connectors are fitted.

6. Replace the hatch and line up the connector on the serial board with the hole made in the hatch.

7. Connect the communication cable.

Connecting to the LonWorks network

The connection to the LonWorks network is performed using the removable terminal connector present on the

board.

na4488a

na4499a

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 99 100

No comments

APC ACFS76080 Installation Manual Page 83