Uniflair LE Accessories Manual84
NOTE: pCOnet is not compatible with the pCO series pCOnet that features Master/Slave operation.
Inventory
Installation
1. Disconnect the power.
2. Using a screwdriver, remove the plastic hatch from the electronic controller.
3. Insert the pCO net card in the plug-in connector. Ensure that the connector is inserted and in contact
with the two supports on the pCO net card. Due to limited space, insert the pCO net card at an angle,
then tilt it back until the connectors line up.
Item Description Quantity
PCO1000BA0 interface board 1
Jumpers 3
Connector 1
Cover 1
na4788a
Comments to this Manuals