APC P D U User's Guide download pdf (Page 99)

USER’S GUIDE

Switched Rack PDU

on the Transmit Current Settings Remotely screen, if you checkmark Start a

Web browser when finished, the default Web browser connects to the Network

Management Card or device after the Wizard transmits the settings.

4. Click Finish to transmit the settings. If the IP address you entered is in use on the

network, the Wizard prompts you to enter an IP address that is not in use. Enter a

correct IP address, and click Finish.

5. If the Wizard finds another unconfigured Network Management Card or device, it

displays the screen to enter TCP/IP settings. Repeat this procedure beginning at

step 3, or to skip the Network Management Card or device whose MAC address is

currently displayed, click Cancel.

Configure or reconfigure the TCP/IP settings locally

1. Contact your network administrator to obtain valid TCP/IP settings.

2. Connect the serial configuration cable (which came with the Network Management

Card or device) from an available communications port on your computer to the

serial port of the card or device. Make sure no other application is using the

computer port.

3. From the Start menu, launch the Wizard application.

4. If the Network Management Card or network-enabled device is not configured, wait

for the Wizard to detect it. Otherwise, click Next>.

5. Select Locally (through the serial port), and click Next >.

6. Enter the system IP, subnet mask, and default gateway for the Network

Management Card or device, and click Next >.

7. On the Transmit Current Settings Remotely screen, if you checkmark Start a

Web browser when finished, the default Web browser connects to the Network

Management Card or device after the Wizard transmits the settings.

8. Click Finish to transmit the TCP/IP settings. If the IP address you entered is in use

on the network, the Wizard prompts you to enter an IP address that is not in use.

Enter a correct IP address, and click Finish.

9. If you selected Start a Web browser when finished in step 7, you can now

configure other parameters through the Web interface of the card or device.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 124 125

No comments

APC P D U User's Guide Page 99