APC NBRK0320E Datasheet download pdf (Page 152)

Advanced View: Defining Thresholds

Using Your Appliance 143

b.By default, all time periods in the schedule are set to Enabled. To disable the threshold for a

currently enabled period of time, highlight the period of time by clicking-and-dragging over the

desired time range, and then click Disable. To enable the threshold for a currently disabled

period of time, highlight the period of time by clicking-and-dragging over the desired time

range, and then click Enable.

c.When you have finished creating your Advanced Threshold, click OK to save the schedule and

return to the Thresholds task.

• Select an Alert Severity value for this threshold. Available Alert Severities are, in order of

escalating severity: Information, Warning, Error, Critical, or Failure. By default, the Alert

Severity generated by this threshold will be “Error.”

•Specify the Alert Profile that will be used to determine what alert notification actions will be

taken in response to this threshold. By default, the Default Alert Profile is used for all

thresholds. However, if you have created additional Alert Profiles you can specify that a

threshold use an Alert Profile other than Default.

• Select Cameras to Trigger in response to the alert. If desired, alert notifications generated in

response to this threshold can include image captures from any Camera Pod 120s connected to

your appliance. To include images from one or more connected Camera Pod 120s, check the

check boxes that correspond to the desired pods.

• Specify a User-specified URL and User-specified Description. You can use these fields to

include additional user-specific information with any alert notifications that are generated

using this threshold.

9. Click OK to save this threshold.

Minimum Value Threshold

A minimum value threshold is defined by specifying a minimum acceptable value for the sensor. If the

value reported by the sensor falls below the specified value an alert condition is reported. To define a

minimum value threshold:

1. Start the Camera Pods, Sensor Pods, or Device Crawlers task by double-clicking on the appropriate

icon.

2. Click Sensors... to open the Sensor Configuration window.

3. Select from the Sensors selection list the sensor for which you will define a threshold. A list of

thresholds that have been previously defined for the selected sensor, if any, appears in the

Thresholds selection list.

4. Click Add... to open the Select Threshold window.

5. Select Minimum Value Threshold and then click OK to close the Select Threshold window.

6. Type in the Threshold Name field a name for this threshold.

7. Specify Basic threshold settings. From the Basic tab in the Thresholds pane:

a. Type in the Minimum field (or use the arrows in the field to specify) the lowest acceptable value

for the selected sensor. This is the value that, if fallen below, will result in an alert condition.

Note

The Alert Profile drop box will appear in the Advanced tab only if additional

Alert Profiles have been created. For more information see “Creating an Alert

Profile” on page 63.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 209 210

Comments to this Manuals

No comments

APC NBRK0320E Datasheet Page 152

Comments to this Manuals

Related products and manuals for Racks APC NBRK0320E