APC INROOM ACPSC3000 Operations Instructions Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
InRoom CW/DX – Operating Instructions
1 2
ON
OFF
1 2
ON
OFF
3 4
ON
OFF
3 4
ON
OFF
3 4
ON
OFF
3 4
ON
OFF
RS485
5 6
ON
OFF
5 6
ON
OFF
5 6
ON
OFF
5 6
ON
OFF
57
9.1.5 Operation
The steam humidifi er is controlled and monitored by the controller. No further operating measures are
required for continuous operation.
Vary the humidifi er output by operating the DIP-switches A3/4 located on the humidifi er printed circuit
board.
The humidifi er operation is indicated by a green LED.
From the yellow LED you can see the state of operati-
on of the humidifi er (see diagrams 1, 2). The red LED
indicates if an alarm is active (see alarm table).
Yo u can also manually drain the steam cylinder (see
9.1.6 Maintenance on page 61). The position of the
TA RATE-switches 1-4 and the DIP-switches A2 and
B2 are not to be changed under any circumstances.
For this reason the switches are sealed.
100 % humidifi cation capacity
75 % humidifi cation capacity
50 % humidifi cation capacity
20 % humidifi cation capacity
DIP A2: Alarm relay status
Relay energized (contact closed)
when at least 1 alarm is active, other-
wise not energized (contact open).
Relay not energized (contact open)
when at least 1 alarm is active, other-
wise energized (contact closed).
Power supply 24 VAC
G/G0
manual
drainage
drain valve
fi l l valve
high level/foam
sensor
conductivity sensor
external TA M
immersed electrodes
maximal 5A
alarm relay
humidity sensor
external controller
remote ON/OFF
green LED
yellow LED
red LED
fi g . 1
3 days
2 days
3 days
7 days
DIP A5-6: Adjustment of the inactivity period, after
which the cylinder is completely drained
.
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 79 80

Comments to this Manuals

No comments