APC MGE Galaxy 300i Installation Manual download pdf (Page 38)

Setting the Wizard

1. From the Default screen, press ENTER.

2. Go to SETTINGS by using the UP/DOWN

navigation keys and press ENTER.

SETTINGS

3. Go to W IZARD by using the UP/DOWN

navigation keys and press ENTER.

WIZARD

4. Select ENABLE or DISABL E by using the

UP/DOWN navigati on keys.

ENABLE

5. Press ENTER to conﬁrm the new wizard

setting. After three seconds the UPS conﬁrms

the new setting by the prompt Done!.

6. Press ESC until you return to the Default

screen.

Done!

Setting the Date Format

1. From the Default screen, press ENTER.

2. Go to SETTINGS by using the UP/DOWN

navigation keys and press ENTER.

SETTINGS

3. Go to DATE FORMAT by using the

UP/DOWN navigation keys and press

ENTER.

DATE FORMAT

4. Select between values YYYY/MM/DD,

DD/MM/YYYY,orMM/DD/YYYY.

YYYY/MM/DD

5. Press ENTER to conﬁrm the new date format.

After three seconds the UPS conﬁrms the new

setting by the prompt Done!.

6. Press ESC until you return to the Default

screen.

Done!

Setting the Date and Time

Note: The correct date and time must be set for event time-stamping purposes.

Note: The r ange of year runs from 2010 to 2035.

1. From the Default screen, press ENTER.

2. Go to SETTINGS by using the UP/DOWN

navigation keys and press ENTER.

SETTINGS

3. Go to DATE&TIME by using the UP/DOWN

navigation keys and press ENTER.

DATE&TIME

4. The digit of year, month, or date is now active

depending on the settings format.

2010-01-01

00:00:00

MGE™ Galaxy™ 300 and MGE™ Galaxy™ 300i Operation

990-3619B-001

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

Comments to this Manuals

No comments

APC MGE Galaxy 300i Installation Manual Page 38

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) APC MGE Galaxy 300i