Note: Please refer to the replacement procedures in the manual shipped with the card.
Please also refer to the UPS installation manual shipped with the U PS on how to connect
the communication cables.
Dust Filter
Note: The UPS is equipped with a dust filter, which must be changed at intervals depending
on the dust level present.
Note: Do not reuse the filter by cleaning the dust filter.
Part Part Number
Description
MGE Galaxy 300 / 300i Dust Filter
- Narrow Tower (400mm)
G3HTOPT005
Protects the UPS from dust
MGE Galaxy 300 / 300i Dust Filter
- Wide Tower (500mm)
G3HTOPT006 Protects the UPS from dust
Store the Dust Filter
Ambient temperature
Relative Humidity
-10°C to 60°C (14°F to 140°F) 0%–90% Non-condensing
Replace Dust Filter
1.
Open the upper door at an 90º angle by pushing
the white dot on the right side of the door.
990-3619B-001
MGE™ Galaxy™ 300 and MGE™ Galaxy™ 300i Operation
43
Comments to this Manuals