APC MGE Galaxy 300i Installation Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
1. From the Default screen, press ENTER.
2. Go to SETTINGS by using the UP/DOWN
navigation keys and press ENTER.
SETTINGS
3. Go to SET PASSWORD by using the
UP/DOWN navigation keys and press
ENTER.
SET PASSWORD
4. The rst digit is now active. Use the
UP/DOWN navigation keys to select the first
digit from 0 to 4 and press ENTER.
000
5. The second digit is now active. Use the
UP/DOWN navigation keys to select the
second digit from 0 to 4 and press ENTER.
000
6. The third digit is now active. Use the
UP/DOWN navigation keys to select the third
digit from 0 to 4 and press ENTER to confirm
the password.
When the password has been set, the prompt
Done! is displayed for three seconds before
the new password is displayed. Press ESC to
return to the previous menu at any time.
000
Done!
Entering the Password
Note: Default password is 000.
Note: If you choose a wrong digit, press ESC at any time during this procedure to return to
the previous menu and reenter your password.
1. When the first digit is active, use the
UP/DOWN navigation keys to select th
efirst
digit from 0 to 4 and press ENTER.
Please enter password:
000
2. The second digit is now active. Use the
UP/DOWN navigation keys to select the
second digit from 0 to 4. and press ENTER.
Please enter password:
000
3. The third digit is now active. Use the
UP/DOWN navigation keys to select the third
digit from 0 to 4 and press ENTER to confirm
the password.
Note: If the password is correct,
you are allowed to continue your
desired procedure. If the password
is incorrect, the prompt Wrong
password! is displayed for three
seconds before the display returns to
the previous menu and so you can try
again.
Please enter password:
000
990-3619B-001
MGE™ Galaxy™ 300 and MGE™ Galaxy™ 300i Operation
37
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Comments to this Manuals

No comments