APC MGE Galaxy 300i Installation Manual download pdf (Page 39)

5. Use the UP/DOWN navigati on keys to select

a value of the active digit and press EN TER.

6. Use the UP/DOWN navigati on keys to select

a value of the next active digit followed by

ENTER and r epeat this procedure until a

value of the last digit has been chosen.

2010-01-01

00:00:00

7. Press ENTER to conﬁrm the last value. After

three seconds the UPS conﬁrms the new

setting by the prompt Done!

8. Press ESC until you return to the Default

screen.

Done!

Setting the Temperature

1. From the Default screen, press ENTER.

2. Go to SETTINGS by using the UP/DOWN

navigation keys and press ENTER.

SETTINGS

3. Go to TEMPERAT URE by using the

UP/DOWN navigation keys and press

ENTER.

TEMPERATURE

4. Select CEL SIUS or FAHRENHEIT.

CELSIUS

5. Press ENTER to conﬁrm the new temperature

value. After three seconds the UPS conﬁrms

the new setting by the prompt Done!.

6. Press ESC until you return to the Default

screen.

Done!

Setting the Language

1. From the Default screen, press ENTER.

2. Go to SETTINGS by using the UP/DOWN navigation keys and press ENTER.

SETTINGS

3. Go to LANGUAGE by using the UP/DOWN navigation keys and press ENTER.

LANGUAGE

4. Select between the following 18 languages:

French Italian Dutch

Russian Turkish Thai

English Spanish Swedish

Polish Indonesian

Korean

German

Portuguese

Finnish

Greek Chinese Simpliﬁed Norwegian

5. Press ENTER to conﬁrm the new display language. After three seconds the UPS conﬁrms the

new setting by the prompt Done!.

990-3619B-001

MGE™ Galaxy™ 300 and MGE™ Galaxy™ 300i Operation

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Comments to this Manuals

No comments

APC MGE Galaxy 300i Installation Manual Page 39

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) APC MGE Galaxy 300i