APC Network Management Card AP9617 User's Guide download pdf (Page 107)

®®

USER’S GUIDE

network management card

101

Trap Receivers

The Trap Receiver settings allow you to define which of up to four specific

NMSs will be sent traps.

Email options

See Email Feature.

In the control console, these settings are accessed through

the SNMP option in the Network menu.

Item Definition

Community Name

This setting defines the password (maximum of 15 characters)

used when traps are sent to the

NMS identified by the Receiver

NMS IP setting.

Receiver NMS IP

Identifies the

NMS that will be sent traps by its IP address. If

this setting is 0.0.0.0 (the default value), traps will not be sent to

any

NMS.

Trap Generation

Enables (by default) or disables the sending of any traps to the

NMS identified the Receiver NMS IP setting.

Authentication Traps

Enables or Disables the sending of authentication traps to the

NMS identified the Receiver NMS IP setting.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 149 150

No comments

APC Network Management Card AP9617 User's Guide Page 107