®
®®
®
USER’S GUIDE
network management card
115
DHCP response options
Each valid DHCP response contains options which provide the TCP/IP
settings that a Management Card needs to operate on a network, as well as
other information that affect the Management Card’s operation.
A Management Card uses the Vendor Specific Information option (option
43) in a DHCP response to determine whether the DHCP response is valid.
Vendor Specific Information (option 43). The Vendor Specific
Information option contains up to two APC specific options encapsulated in
a TAG/LEN/DATA format: the APC Cookie and the Boot Mode Transition.
APC Cookie. Tag 1, Len 4, Data “1APC”
Option 43 tells the Management Card that a DHCP server has been
configured to service APC devices. By default, the APC Cookie must be
present in this DHCP response option before a Management Card can accept
the lease.
The format of a Vendor Specific Information option that contains the APC
cookie would look as follows (shown in hexadecimal format):
Option 43 = 0x01 0x04 0x31 0x41 0x50 0x43
You can use the DHCP Cookie Is setting described in
Management Card settings to disable the APC cookie
requirement.
Comments to this Manuals