APC Network Management Card AP9617 User's Guide download pdf (Page 80)

®®

USER’S GUIDE

network management card

Symmetra or Symmetra 3-Phase UPS. The following table describes the

Utility Line settings for a Symmetra. A Symmetra 3-Phase UPS uses the

Output Frequency Range and If UPS fails settings only.

Alarm Thresholds (Symmetra or Symmetra 3-Phase UPS)

The following table describes the Alarm Thresholds settings for the

Symmetra or Symmetra 3-Phase UPS.

Setting Definition

Output Voltage Defines the nominal

AC voltage level for the UPS output.

Vout Reporting Defines how the

UPS scales its output voltage readings.

Output Frequency

Range

Defines the nominal value for the frequency used by the output

voltage.

UPS fails, and

frequency or voltage

is out of range

Defines how the

UPS will respond if the stated condition occurs.

Threshold Definition

Alarm if Redundancy

Under

Defines the minimum redundancy level that can be present

without causing an alarm.

Alarm if Load Over

Defines the maximum load that the attached equipment can

place on the

UPS without causing an alarm.

Alarm If Runtime

Under

Defines the minimum runtime that can be available without

causing an alarm.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 149 150

No comments

APC Network Management Card AP9617 User's Guide Page 80