®
®®
®
USER’S GUIDE
network management card
41
Advanced settings. The Boot mode affects which settings are available:
• Two settings are available for all Boot mode selections to define the
Management Card’s Host Name and Domain Name values.
• A Port Speed setting is available for all Boot mode selections to
define the TCP/IP port’s communication speed (Auto-negotiate, by
default).
• Three settings are available for all Boot mode selections, except
Manual, to identify the Management Card in BOOTP or DHCP
communication:
– Vendor Class: Uses APC, by default.
– Client ID: Uses the Management Card’s MAC address, by default.
– User Class: Uses the Management Card’s application module
type, by default. For example, a Symmetra module sets the User
Caution
If the Client ID is changed from the Management
Card’s MAC address, the new value must be unique on
the LAN. Otherwise, the DHCP or BOOTP server may
act incorrectly.
Comments to this Manuals