®
®®
®
USER’S GUIDE
network management card
19
Main screen status fields.
• A Stat field reports the Management Card status.
Stat : P+ N+ A+
Where,
P+ indicates that the APC operating system (AOS) is Ok
N+ indicates that the network is Ok
N? indicates that a BOOTP or DHCP request cycle is in progress
N- indicates that the Management Card failed to connect to the network
N! indicates that another device uses the Management Card’s IP
address
A+ indicates that the application is Ok
A- indicates that the application has a bad checksum
A? indicates that the application is initializing
A! indicates that the application is not compatible with the AOS
• A UPS model and name field reports the status of the
UPS.
Smart-UPS 700 RM named User Ed : On Line
• The status of the probes (Thresholds) and contacts (Contact Alarms)
at any environmental monitor, including the Integrated Environmental
Monitor’s output relay (Relay) at an AP9618 or AP9619 Management
Card, is reported just above the UPS status (UPS model and name)
field.
Thresholds Ok, Contact Alarms Ok, Relay OK
The AOS should always report that the status is OK (P+); you
may not be able to access the Management Card if the AOS
is not OK. If the AOS status in not OK, see APC Worldwide
Customer Support for information about how to contact APC
technical support.
Comments to this Manuals