APC 10-40kW 208/480V Installation Guide download pdf (Page 34)

34 Installation Guide Silcon DP300E 208V/480V 10-80 kVA

7OY0002 US rev. 04

Connection

4.6 Installation of battery drawers

The installation and use of this product must comply with all national, federal, state,

municipal or local codes that apply. If you need assistance, please have your UPS

model and serial number available and call APC’s toll free technical support at:

1-877-287-7835 (1-877-2UPS-TEK).

You can find additional product information on the APC World Wide Web site at

http://www.appc.com. See also Section 11.0: How to contact APC.

Important Safety Instructions

a) Installation of battery drawers in the UPS cubicle should be performed or super-

vised by personnel knowledgeable of batteries and the required precautions.

Keep unauthorized personnel away from batteries.

b) When replacing batteries, replace with the same number and type as installed.

c) CAUTION - Do not dispose of battery or batteries in a fire. The battery may

explode.

d) CAUTION - Do not open or mutilate the battery or batteries. Released electrolyte

is harmful to the skin and eyes. It may be toxic.

e) CAUTION - A battery can present a risk of electrical shock and high short circuit

current. The following precautions should be observed when working on batteries:

1) Remove watches, rings, or other metal objects.

2) User tools with insulated handles.

3) Wear rubber gloves and boots.

4) Do not lay tools or metal parts on top of batteries.

5) Disconnect charging source prior to connecting .

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 118 119

No comments

APC 10-40kW 208/480V Installation Guide Page 34