APC NBRK0320E Datasheet download pdf (Page 132)

Advanced View: Configuring Appliances

Using Your Appliance 123

Country (if supported by modem) Some modems support country-specific communications

parameters to ensure that the modem adheres to

communications standards and requirements in use in the

country. If your modem supports these strings the Country

drop-box will be available. Select from the Country drop

box the country in which the appliance will be dialing out.

You can also select None, which will configure the modem

to use the default communications parameters.

Schedule: Dial-Out Enable Check this checkbox to create a schedule of times at which

your appliance will establish a PPP connection, regardless of

whether alerts have been generated or not.

Note: By default no scheduled dial-out events are

configured. If you choose to enable scheduled dial-outs, you

should then click the Set Schedule button located beside the

Enable Dial-Up checkbox to specify the days and times at

which PPP connections will be established.

Schedule: Dial-In Enable Check this check box to enable PPP dial-in support on your

appliance. If dial-in support is enabled, you will be able to

use a system and modem to dial into the appliance and

establish a PPP connection. The remote system must provide

a Supervisor User ID and Password to establish the PPP

connection. For information on how to manage an appliance

that you have dialed into, see “Managing your Appliance

Using a Dial-In PPP Connection” on page 125.

Notes:

• By default dial-in access is enabled 24 hours a day, 7 days

a week, unless you use the dial-in scheduler to enable and

disable dial-in access for specified days and times. To

configure a dial-in access schedule, click the Set Schedule

button located beside the Enable Dial-in check box.

• Note that, if the appliance encounters a situation that

requires it to dial-out (due to schedule, alert, or a

immediate dial-out request), it will immediately over-ride

any current dial-in session without warning.

Alert Dial-out Settings: Dial-out

Response to Alerts/Reports

Select from this drop-box the PPP dial-up action that will be

taken by the appliance when alerts or periodic reports are

generated. You can select any of the following:

• Disabled — No dial-up action is taken when alerts or

reports are generated.

• Enabled — Use PPP to connect to the network whenever

an alert or report is generated.

• Delivery Failure — Use PPP to connect to the network

only if network-based alert notification (e-mail, FTP,

HTTP posting, etc.) or report delivery fails.

Alert Dial-out Settings: Remain

connected after alerts/reports sent

Use the spin buttons to specify the number of minutes the

appliance will keep the PPP connection active after

connecting to the network to deliver alert or report

information.

Field Description

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 209 210

Comments to this Manuals

No comments

APC NBRK0320E Datasheet Page 132

Comments to this Manuals

Related products and manuals for Racks APC NBRK0320E