APC MGE Galaxy 300 User's Guide download pdf (Page 16)

Network Management Card User’s Guide7

Watchdog Features

Overview

To detect internal problems and recover from unanticipated inputs, the Management Card uses internal,

system-wide watchdog mechanisms. When it restarts to recover from an internal problem, a System:

Warmstart event is recorded in the event log.

Network interface watchdog mechanism

The Management Card implements internal watchdog mechanisms to protect itself from becoming

inaccessible over the network. For example, if the Management Card does not receive any network

traffic for 9.5 minutes (either direct traffic, such as SNMP, or broadcast traffic, such as an Address

Resolution Protocol [ARP] request), it assumes that there is a problem with its network interface and

restarts.

Resetting the network timer

To ensure that the Management Card does not restart if the network is quiet for 9.5 minutes, the

Management Card attempts to contact the default gateway every 4.5 minutes. If the gateway is present, it

responds to the Management Card, and that response restarts the 9.5-minute timer. If your application

does not require or have a gateway, specify the IP address of a computer that is running on the network

most of the time and is on the same subnet. The network traffic of that computer will restart the 9.5-

minute timer frequently enough to prevent the Management Card from restarting.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 104 105

No comments

APC MGE Galaxy 300 User's Guide Page 16