APC ACFS76080 Installation Manual download pdf (Page 84)

Uniflair LE Accessories Manual82

Activating the service pin

To activate the service pin, short-circuit the two pins using the tip of a screwdriver. Activation is confirmed when

the LED service light activates.

Configuration

Using the LED display

NOTE: If installing multiple units on the network, each unit needs a unique address to avoid conflicts.

1. Press Prg on the display interface.

2. Select SETTINGS.

3. Enter the password.

4. Select SERIAL/MODEM SETTINGS.

5. Enter the following:

Serial Address: 001

Serial Speed: 4800

Protocol: Standard

6. Navigate to the main screen.

Item Description



pCO connector



Terminal block for LonWorks

network (GND, A, B)



Service pin to the board



Red anomaly LED



Green service that displays normal LED operation

GND A B

na4778a

*Dimensions shown in mm (in.).

(2.36)

(1.14)

(0.78)

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 99 100

No comments

APC ACFS76080 Installation Manual Page 84