APC InfraStruxure Specifications download pdf (Page 22)

14 InfraStruXure System—Installation and Start-Up

Connect the Power Source to the PDU

Access the PDU Main Input switch

Open the back doors of the PDU, unlock the top, smaller door, using the provided red key, and loosen

the two screws holding the larger, hinged door in place.

Attach conduit to the PDU for the input conductors

1. Remove the rectangular gland plate by loosening the captive screws, using a Phillips or standard

screwdriver:

– In the bottom of the PDU for wiring under a raised floor

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

No comments

APC InfraStruxure Specifications Page 22