APC InfraStruxure Specifications download pdf (Page 34)

26 InfraStruXure System—Installation and Start-Up

Install InfraStruXure Rack-Mount Devices

Install the Rack Automatic Transfer Switches (ATS)

Install a Rack ATS in the top of each enclosure for overhead wiring, and in the bottom of each

enclosure for wiring under the floor.

The Rack ATS is an optional component and not all InfraStruXure systems will include them.

Install the Rack Power Distribution Units (PDU)

Install Rack PDUs in the rear of the NetShelter VX enclosure, in the channel directly behind the rear

vertical mounting rails. For overhead wiring, make sure that the power cord is pointing toward the

roof of the enclosure. For under the floor wiring, make sure that the power cord is pointing toward the

floor.

Install the InfraStruXure Manager and Hub (or Switch)

Install the InfraStruXure Manager in the enclosure closest to the PDU. The CAT-5 data cables

included with your configuration are of varying lengths, based on the distance components will be

installed from the PDU.

Install the Environmental Monitoring Unit or Environmental Management System

The Environmental Monitoring Unit and the Environmental Management System are optional

components and not all InfraStruXure systems will include them.

See als

See the installation instructions in the manual included with your Rack ATS.

See als

See the installation instructions in the manual included with your Rack PDU.

See als

See the installation instructions in the manual included with your InfraStruXure

Manager.

See als

See the installation instructions in the manual included with the Environmental

Monitoring Unit or Environmental Management System.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

No comments

APC InfraStruxure Specifications Page 34